My Hand-Stitched Regency Gown
Start date: Feb 10, 2012
Finish date: Feb 23, 2012
Fabric: for the size 12 I made, 4 Yds, 51″wide; Lining: 1 Yd
Adjustment points: Length of skirt: Cut 37″(upper skirt)+11″(lower skirt) instead of 39 1/2″ + 12″ suggested by the pattern
#031: Circa 1796-1806 Lewis & Clark Era: Empire Gown - Courtesy: Past Patterns
As my first attempt for the La Mode Bagatelle Bodiced Petticoat went on very well, I decided to challenge myself for an authentic period look, using the Front Closing Gown pattern from Past Patterns. According to the good reviews on GBACG by many costumers, this pattern should be very professional and reliable and this is proved to be true. To be honest, if I have had used this pattern before the LMB one, I wouldn’t be able to bear with the drawings and wording of the LMB…Not because that LMB is too bad, but just Past Patterns is too good. (In fact the result of LMB petticoat looks great) The pattern is very well researched, correctly illustrated and very clearly texted. I have only found very few points where the outcome doesn’t match the instruction, and I will list them below.
My fabric for this gown: Green-grey cotton as the fashion fabric, and linen as the lining
The fabric I use is a very light weighted Italian cotton. For lining I simply used my leftover 100% white linen fabric from the LMB petticoat, which is a bit luxious as that linen costs about £10 a metre :p. I took a little bit risk here as I didn’t test the pattern on a cheaper fabric first, but I was kind of confident and had a bet on my skills. Thanks God it comes out well!
As sewing machine was not invented at that time, hand-stitch is required for the whole gown. I have tried my best to hand-stitch 90% of the gown, except for some terribly long lines on the skirt. (It’s really too tiring to sew several 88-inch-long back stitches by hand!!! :p:p:p)
Trianglel: Back Piece
The design of the back is the eye-catching part of this gown. The front part of the lining is separate with the bodice, and will hang free and be pinned when being worn.
Bodice: Fashion Fabric and Lining Together
When it came to the cord, the pattern suggested to use candlewicking yarn to make your own cord. I couldn’t find this yarn/thread either in my local craft shops or harberdashery departments in John Lewis or Liberty, so I digged some 100% cotton knitting yarn from my stash, which happen to look nice with the fabric, and twisted them to make the neck cord.
Cotton Knitting Yarn as Cord 🙂
So far the pattern has done really well for the bodice and I didn’t meet any difficulty except for a tiny mistake on page 7: when it says to press the seam allowance to the wrong side for the lining, it should be the right side. The illustration is correct but the texts are not. The second issue is when it came to the knife pleats of the skirt, I had some problem with the pleating template. Not sure if it’s something to do with sizes, but the pleats made according to the template don’t match the center back of the bodice – the right side (close to the CF) is much shorter than the left side, making the possibility of having at least 9 pleats on the left, but only 5 on the right. I had to move the template the width of 1.5 pleats to the left, starting from the CF, to make it look about equal. This is the only problem I had with the pattern.
Making Pleats and Front Crescent Tuck
For the hem of the skirt, I deliberately left the selvage side of the lower skirt undone. So here is the completed gown!
1796-1806: Front Closing Gown
I’m not very sure about the front tuck…Although it does make the length right. And also the neck cord should be hiden inside, but I think it’s ok to let them out since they add some brightness to the gown.
1796 Gown: Side View 1
Although this is how the back should look like, I think I’ll prefer a more high-waist back. Until next time!
1796 Gown: Back View
Basically I am quite satisfied with it and think it is a very pretty day dress 😉 I’m supposed to wear a chemise, transition stay and a neck kerchief underneath, but they haven’t been made yet :p
Read Full Post »